2017-08-07 Energy Conservation Program - Test Procedure for Dedicated-Purpose Pool Pumps - Final rule (US Energy Efficiency and Renewable Energy Office Regulation) (EERE) (2018 Edition‪)‬

The Law Library presents the complete text of the 2017-08-07 Energy Conservation Program - Test Procedure for Dedicated-Purpose Pool Pumps - Final rule (US Energy Efficiency and Renewable Energy Office Regulation) (EERE) (2018 Edition).
Updated as of May 29, 2018

On September 20, 2016, the U.S. Department of Energy (DOE) issued a notice of proposed rulemaking (NOPR) to establish a new metric, as well as new definitions, test procedures, certification requirements, enforcement testing procedures, and labeling provisions for dedicated-purpose pool pumps (DPPPs). That proposed rulemaking serves as the basis for the final rule. Specifically, DOE is adopting a test procedure for measuring the weighted energy factor (WEF) for certain varieties of dedicated-purpose pool pumps. This final rule incorporates by reference certain sections of the industry test standard Hydraulic Institute (HI) 40.6-2014, “Methods for Rotodynamic Pump Efficiency Testing” as the basis of the adopted test procedure. The definitions, test procedures, certification requirements, enforcement testing procedures, and labeling provisions are based on the recommendations of the DPPP Working Group, which was established under the Appliance Standards Rulemaking Federal Advisory Committee (ASRAC).

This ebook contains:
- The complete text of the 2017-08-07 Energy Conservation Program - Test Procedure for Dedicated-Purpose Pool Pumps - Final rule (US Energy Efficiency and Renewable Energy Office Regulation) (EERE) (2018 Edition)
- A dynamic table of content linking to each section
- A table of contents in introduction presenting a general overview of the structure