G-Code Reference

G-CODES MACHINE CODE REFERENCE:


* G-code Table

* G00 - Rapid Linear Motion

* G01 - Linear Motion at Feed Rate

* G02 and G03 - Arc at Feed Rate

* G04 - Dwell

* G10 - Coordinate System Data Tool and Work Offset Tables

* G17, G18 and G19 - Plane Selection

* G20 and G21 - Length Units

* G28 and G30 - Return to Home

* G28.1 - Reference Axes

* G40, G41 and G42 - Cutter Radius Compensation

* G43, G44 and G49 - Tool Length Offsets

* G47 - Engrave Sequential Serial Number

* G53 - Move in Absolute Coordinates

* G54 to G59 and G59 P~ - Select Work Offset Coordinate System

* G61 and G64 - Set Path Control Mode

* G73 - Canned Cycle - High Speed Peck Drill

* G80 - Cancel Modal Motion

* G81 to G89 - Canned Cycles

* G90 and G91 - Distance Mode

* G92, G92.1, G92.2 and G92.3 - G92 Offsets

* G93, G94 and G95 - Set Path Control Mode

* G98 and G99 - Canned Cycle Return Level


Good lucky!