Creo Parametric 3.0 Basics Creo Parametric 3.0 Basics

Creo Parametric 3.0 Basics

    • 79,00 kr
    • 79,00 kr

Utgivarens beskrivning

If you like to learn by doing, then this book shows you to design and document mechanical components one-step at a time. Brief explanations followed by step-by-step instructions, and a real-world example make it a good starting point to learn Creo Parametric.


The author introduces the user-interface, and then starts solid modeling. You will learn to draw sketches, create 3D parts and assemble them, create drawings, sheet metal parts, and design complex shapes using surface modeling tools. The examples in this book help you to discover the use of various tools and capabilities of Creo Parametric. Following are some of the skills you acquire after completing this book:


• A good command over the user-interface

• Create and edit parametric sketches

• Create basic and complex solid models

• Create assemblies using Bottom-up and Top-down approaches

• Create manufacturing drawings

• Sheet metal design

• Create and edit splines

• Create complex and ergonomic surfaces


Creo Parametric 3.0 Basics is a self-study guide. You can learn various tools or work with examples. In both ways, you can develop a good foundation in solid modeling.

GENRE
Datorer och internet
UTGIVEN
2015
3 januari
SPRÅK
EN
Engelska
LÄNGD
162
Sidor
UTGIVARE
Tutorial Books
LEVERANTÖRS­UPPGIFTER
Draft2Digital, LLC
STORLEK
29
MB
CATIA V5-6R2015 Basics - Part I : Getting Started and Sketcher Workbench CATIA V5-6R2015 Basics - Part I : Getting Started and Sketcher Workbench
2015
LibreCAD Basics Tutorial LibreCAD Basics Tutorial
2020
Solidworks 2018 Learn by doing - Part 1 Solidworks 2018 Learn by doing - Part 1
2018
AutoCAD 2018 For Architectural Design AutoCAD 2018 For Architectural Design
2017
Introduction to AutoCAD Plant 3D 2017 Introduction to AutoCAD Plant 3D 2017
2016
AutoCAD 2016 For Architectural Design AutoCAD 2016 For Architectural Design
2015